Wishing you and yours a safe and Happy Thanksgiving!
A few photos from a recent walk along the canals with my lab Denali. Click to enlarge.
Thanks for reading!
Okay – so I've posted a few low light shots from my velodrome work in my 1370 post, but I'd not had the opportunity to shoot a daytime event to that point. So here are some shots from a Fall series race a few weeks ago. All shots were taken at ISO 100 with the Canon EOS 50D using the 100-400 f/4.5-5.6 L lens. I've left full EXIF on the enlarged photos, tho I'm not sure if Typepad will keep that data in place after upload. You can click to enlarge the images.
Enjoy and thanks for reading!
Okay – they had told me they were working on one, then the w/out battery grip was posted on-line, then "coming soon – accepting pre-orders" was next for the version with the battery grip.
I just took a quick look today and voila! The BGE2-L50 is now available with some images posted.
At first glance it looks like it has been worth the wait. A nice wide opening for the cables, the ability to get the covers open with the l-plate in place, and the plate looks like it will provide good protection for the corners of the BG, perhaps better than the 40D version did. It also appears that there is now an extension of the plate to allow for the camera strap to connect to the plate itself. The photos don't show the detail of this strap tab that well, but it appears that it may be removable – it looks like there is a screw that may allow you to remove the tab if you don't want it – or to easily remove the camera from the plate if you don't want to un-do the strap from the bracket tab itself.
Yup – one is order and should be here soon (I think Monday) – I'll post a review w/ images and my thoughts then.
Thanks for reading!
Okay – sorry about falling off the face of the blogging planet for a bit there – wow – two weeks actually!
I've been buried at the day job and have been busy on the weekends with a few events, some travel, and a photog job or two… Oh – and that "personal life" thing – trying to work some of that in too… LOL
I did finally figure out how to change the format of the archive settings… so now you can browse them by title w/out having to page from post to post…
The Canon 50D now has over 5500 images under its belt and I'm enjoying it more and more. I'll work some of my recent photos into some of the upcoming posts…
A few topics I'm kicking around:
If you have one you would like to see sooner than later, post a comment. You can also throw suggestions for posts into a comment as well.
Thanks for reading!
Both of these were shot at Fort Logan National Cemetary in Colorado during my work on a project to fly a restored Vietnam Veteran Huey helicopter around the US before donating it to the Smithsonian. You can learn more at AmericasHuey.org
Click to enlarge:
Okay – so one of the often referred to but rarely detailed new features on the 50D is the HDMI output port. It lives in the same strip of output ports on the side of the camera as the USB and "old fashioned" video out connections.
Today on the drive home from work, I popped into a local electronics store and bought an HDMI-A to HDMI-C cable. I only sprung for the 6' cable as I'm not sure what I'd use if for (in practice) and how often I'd make use of it at that. I've seen posts where you can pick a cable up for $7 – 10 bucks… I dropped a few more than that, but well short of the $50 that Monster Cable is looking to get from you. I know there are folks who swear by the better cables, but – again – since I'm testing, figured I'd get a fair idea for my $15 outlay…
Okay – I think the most obvious use for this would be the slide show of images at the end of a day out and about. Quite a few hotels are starting to put flat panel displays in their rooms, and who knows – if you are over at the relatives for Thanksgiving, why not wow the crowd with a slide show of shots from the days activities.
A quick insertion of the cable into the back of the set, plug the other end into the camera, power it on, hit the "menu" button to get to the slide show, and voila! The new 50D menu is now show in 56" DLP glory… No – I don't think they really push the menu at 1080, but then again – I'm not sure at what resolution they push the output of the images either. A search of the "Instruction Manual" and one with with Google – pretty much came up with nothing. Other than saying "output for high definition screens" – there isn't much detail as to what the output resolution is, if it only renders to the high resolution for the slideshow, or does plain old image playback render in high def? Perhaps the yet to be published 50D White Paper from Canon will shed some light on these questions.
So other than finding that the HDMI-C connector wasn't introduced until HDMI 1.3, and that HDMI is a bidirectional standard, allowing the video device to understand what the capabilities of the display device are – thus sending the proper signal (480p, 720p, 1080i, 1080p) for the best image… I still couldn't find what the output capabilities were of the camera itself.
I had a CF card in the camera that had about 15 shots from a walk with my dog along the canals near my house, so I navigated the billboard sized menu (remember, I've only a 6' cable connected to the back of my set… LOL) till I had fired up the slide show.
Issue number one… Auto rotate of images setting…
When I shoot, I have the camera auto rotate the images only on the computer. That way – when I shoot and preview a landscape shot, it will display the way I just shot theimage, not "vertically" in the LCD when you look at the back of the camera normally… It allows me to get a better sense of the shot before I start to zoom (if needed) and I don't need to rotate the camera out of the attitude that I had just used for taking the last shot.
So – as I watched the slide show, the images that had been shot portrait were rotated by 90 degrees on the screen… Easy enough. Stop playback, navigate the billboard to be "Auto rotate on camera and screen"… Back to the slide show and voila!… I was cookin' w/ grease.
Problem number two… I'd shot all portrait…
Yeah – whoda thunk, but all the shots I'd taken had been portrait… so while the shots looked nice and all, they were not filling the DLP with glorious color… Okay – I can out- wit this camera, right?
I soon went to my computer, brought up the high res .jpgs I used to post to my web site for purchase by my customers, and dropped them onto a CF card. A few minutes later, CF card in the 50D – and the "no images" ignominy stared me in the face…
You guessed it (okay – or maybe not – I ran into this when I tried showing the same .jpg on the 40D and 50D in some earlier tests), I'd dropped the images onto a blank formatted CF card. Seems the camera wants to only read images from the DCIM\100Canon (or similar) directory. Again – no problem, I thought – copy a few images (only three or four to ensure I'd got it right), pop the CF in the camera, and it mocks me yet again… "Cannot Play Back Image" it says… with an artful clip-art yellow question mark on a gray faded background just below the message. Ever the mule (read as stubborn), I roll the thumb wheel to the next pic and find the same, but the third time was the charm… the third image showed just fine.
A Sesame Street flash back of "which one of these things is not like the others" ran through my head and I quickly realized (well – guessed) that I had cropped the other two images, and perhaps the camera, not finding one of its "native" resolution files, was unable to display it. I finished copying the images over, deleted the ones that didn't display, and found that I had about 30 images left to flip through.
Okay – back over to the big-screen, re-connect the cable, and voila! My images on the DLP w/ grand and glorious color!
I'll admit the vertical images were a bit disappointing, just not really filling the screen, but still looking pretty good. It was the landscape shots that took the day… Unlike the NTSC output, the HDMI was indeed giving the full 3×2 ratio of the image with just small black bars to the left and right of the image. Nothing like the bars left right above and below when using the NTSC output.
The other HDMI tethered output thought that I've seen has been for "live view" usage. Yes – it does give you quite a large screen, but I'm not sure how practical this really is. If you're shooting in your living room and you do have a big screen monitor, and for some reason, the nice 50D LCD won't do the trick – sure – run w/ the big screen… LOL… But I think USB connected to a laptop will be just a bit more practical configuration – especially given the AF adjustment you can do from the EOS Utility.
It did let me get a curiously interesting repeating image photo… Which, after the fact, seems a bit curious that it actually turned out. The image shows the magnification area of the live view screen cascading back as the image of the image of the image shows on the television. I snapped the shutter, and before the image I had captured showed, I figured I'd wasted a shutter actuation. I figured that the live view output would shut off before the shutter fired; but I was surprised to see the image was captured.
As I was playing around with the camera with the output, I went to image playback and started reviewing images. This was actually pretty cool - for some reason cooler than the slide show I'd seen earlier… the ability to see the images on the screen, to zoom in and see detail on the screen, was pretty neat. I guess I could see where I'd not have my laptop at a client site, they may not have a raw image conversion tool, but w/ a high def projector or big-screen tv in a conference room. I'd be able to pull the cable out of my bag and rather than several folks crowding around the camera as I chimped through images, I'd be able to share the images with a larger group.
Okay – so is the HDMI output really of use? Well – in a pinch, yes… but for most practical purposes, no… But I'll throw in a bit of a caveat here… It would *not* be of practical use for how *I* shoot.
I shoot a LOT of images when I'm out…
When I was shooting in college for the paper, yearbook and campus quarterly, they beat it into our skulls to always load 36 exposures into the cannisters from the bulk loader. The event was expensive, film was cheap. Shoot portrait and landscape, frame a bunch of different ways. This just became my shooting routine, to the point where, when I got back from vacation, no one wanted to look at my photos when I picked them up from the lab. Everyone learned to wait till I'd culled my photos for the ones I liked. I do the same (and even more so) now with digital being so cheap. Long story short – I'd bore the snot out of anyone looking over my shoulder at Thanksgiving, or back in the hotel room at the end of a day of sightseeing. LOL
If you shoot with great restraint, and you do like to share pics w/ the family the same day – sure – this will work great for you.
Most other situations, a laptop with a USB cable will serve me much better than the HDMI cable. Live view with a USB cable, especially when you remote shoot and store your images directly on the laptop. Presentations and review of images with a client would work better than using an HDMI cable with the camera. Also, more of my clients would have projector that took the output from a laptop than one that has HDMI input. Also - I have more tools to cull through photos on the laptop than just showing images from the camera.
As a final note – I pretty much burned through a battery doing my live view and other HDMI output tests. So while Live View is already a power hog, this takes Live View and other card/display intensive tasks to new battery draining heights…or lows…
If you've other thoughts for the use of the HDMI (well – other than video – do you really want the zoom square in your movie? I don't think so…)
Thanks for reading!
Just a quick post before knocking off for the evening.
Saw a post today on canonrumors.com that had a link to a site that has a free piece of software that can read the (until now) Canon Support territory of how many actuations a shutter has. The idea is pretty basic – it uses the EOS Utility drivers (you put this .exe file in the same directory as the EOS Utility) to access the information from the camera. You plug in the camera to your computer with a USB cable, turn it on, close the EOS Utility if it starts, then start this application. Click the "Get Count" button and voila!.
This program accesses information from the Digic III processor (or the Digic IV) so the app will work on the 40D, 50D, and the 5D Mark II, but not on the 30D, or 350D,400D, etc…
It was interesting to see that my 40D has 27,010 actuations, but how accurate is it? Well, my 50D shows 3,961 – which shows 4 more than the highest image number. This results from some "remote shooting from PC" which counts as a shutter actuation, but since the file is saved directly to the computer, so the compact flash card count doesn't get increased. So I'd say that the 27k actuations reading on my 40D is pretty accurate.
This is only for the PC, not for the Mac, but you can read all the details here.
Thanks for reading!